measure for: outside mount natural shades

  1. Measure the exact width of the area to be covered. It is recommended that 3" be added to the shade width for the standard overlap of 1 1/2" on each side.
  2. Measure the height of the area to be covered. Measure from the ceiling or desired point above the window to approximately 1 1/2" below the window frame.

allow some overlap

For outside mount applications allow the blind to overlap 1 1/2" to 3" on the sides, top and bottom of the window.
 

measure for: inside mount natural shades

  1. Measure width of window opening at three different places and use the narrowest dimension for ordering. The factory will automatically take an allowance of 1/2" for operating clearance unless you specify otherwise.
  2. Measure the height of window from top of opening to top of sill in two places. Use the longest dimension.
  3. To install the product flush with the window frame, a minimum window depth of 2" is required.

minimum mounting depth

Cordless Shades: 1/2"
Standard Shades: 5/8"
 
← previous page (photos)